10/7/26
XL-E100H_OM_EN.fm
E-6
10
9
8
7
6
5
4
3
1
2
General control
Press the ON/STAND-BY button to turn the power on.
To dim the display brightness, press the DEMO/DIMMER
button on the remote control.
z
When the power is turned on, volume illuminator lights
up.
z
To turn on/off the light, hold down the DEMO/DIMMER
button on the remote control for more than 2 seconds.
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the last
set level.
Turn the volume knob towards VOL +/– (on main unit) or
press /– (on remote control) to increase or
decrease the volume.
When you press any of the following buttons, the unit turns
on.
z
CD, USB, AUDIO / LINE (INPUT), TUNER (BAND) on
the remote control: Selected function is activated.
z
/ button on the main unit: The unit turns on and play-
back of the last function will start (CD, TUNER, USB,
AUDIO IN, LINE IN)
The main unit will enter the stand-by mode after 15
minutes of inactivity during:
CD / USB: In the stop mode.
TUNER: No reception of broadcast signal.
AUDIO IN / LINE IN: No detection of input signal or very
low sound audibility.
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
1
Press the BASS/TREBLE button to select “BASS”.
2
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
1
Press the BASS/TREBLE button to select “TREBLE”.
2
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
To turn the power on
After use:
Press the ON/STAND-BY button to enter the power
stand-by mode.
Display brightness control
Volume illuminator
Volume auto fade-in
Volume control
Auto power on function
Auto power off function
RRMCGA22
RRMCGA226
AWS A
Volume illuminator
Dimmer 1
Dimmer 2
Dimmer off
(Display is dim).
(Display gets dimmer).
(Display is bright).
Muting
X-Bass control
Bass control
Treble control
Equaliser
Function
Pops
Vocal
Jazz
Flat
Game
Classic
Equaliser off.
For game
For classical music
For pop music
Vocals are enhanced
For jazz
FM STEREO
FM MONO
USB
Audio In
Line In
CD
AM
Downloaded from
www.Manualslib.com
manuals search engine
Downloaded From Disc-Player.com Sharp Manuals
