34
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. A
maximum of 1800 PLU/subdepartment settings are possible. Each one belongs to a department and acquires
the department’s parameters (dept. type (normal or bottle return), dept. group, tax status, SICS and sign).
A commission group (0 to 2, 0: No commission is applied) can be assigned to each department for commission
for clerks. Each commission amount for individual clerk is calculated based on the corresponding programmed
commission rate and printed later on clerk reports.
The cash register is preprogrammed so all 1800 codes are assigned as PLUs (commission group: 0) associated
with department 1 and preset unit price “0”.
Unit price and associated department assignment
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU, start from entering a unit price or an associated department code without
pressing the
A
key.
To program another PLU, start from the beginning without pressing the
A
key.
To delete a PLU code, use the following sequence:
Function selection
p
To program “00”
To program the following PLU
To program another PLU
A
s
AB
PLU code
(1-1800)
*
PLU code
(1-1800)
p
v
To delete the following PLU
To delete another PLU
A
PLU code
Unit price
Associated dept.
1
p
125
£
A
Key operation example
PLU (Price Look-Up) and Subdepartment Programming
2
*1: To assign departments 21 through 40, press the department shift key.
p
To program zero
Unit price
(max. six digits)
PLU code
(1-1800)
A
D
*
1
*
2
Associated
Dept. key
When the associated department is department 41-99:
p
d
s
To program zero
Associated
dept. code
(1 to 99)
A
Unit price
(max. six digits)
*
2
PLU code
(1-1800)
