manualshive.com logo in svg

Sharp XE-A307, Instruction Manual, Page: 77 / 146

Share
Download
Sharp XE-A307 Instruction Manual Download Page 77

77

 

■

Discount (

-

)

Procedure

Program each item as follows:

• AMOUNT (Use the numeric entry)

Discount amount (max. 8 digits)

• TEXT (Use the character entry)

Description for the discount key. Up to 12 characters can be 
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or 
discount function to each discount key.
+:   Plus amount (premium)
-:   Minus amount (discount)

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered 
unreasonably amounts.
Limit amount: 0.00 to 999999.99

NOTE

In the initial programming, the HALO function is 
programmed as "INVALID".

• ITEM (Use the selective entry)

YES:  Enables the item discount.
NO:   Disables the item discount.

• SUBTOTAL (Used the selective entry)

YES:  Enables the subtoal discount.
NO:  Disables the subtotal discount.

Summary of Contents for XE-A307



















































































































































Reviews:

No comments