Sharp XE-A177 Full Detailed Instruction Manual Download Page 71

Page: 71 / 134

Functional Programming

Use the following procedure to select any option included in the functional programming group:

Procedure

In the SETTING window, select “2 FUNCTIONS.”

• The FUNCTIONS window will appear.

Select any option from the following options list.

1 (-)

Discount

2 %1

Percent 1

3 %2

Percent 2

4 ***RA

Received on account

5 ***PO

Paid out

6 ****CID

Cash in drawer

7 CHK/CG

Check change

8 CA/CHK

Check cashing

The following illustration shows those options included in this programming group.

2 FUNCTIONS

1 (-)

2 %1

3 %2

4 ***RA

5 ***PO

6 ****CID

See “CID (Cash in drawer)” on page 74.

7 CHK/CG

See “CHK/CG (Check change)” on page 74.

8 CA/CHK

See “Check cashing” on page 75.

The screen continues.

Summary of Contents for XE-A177







































































































































Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands

Sharp XE-A177, Full Detailed Instruction Manual

Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands