Sharp UX-B800A, Service Manual, Page: 19 / 140

UX-B800A
2 – 5
2.12. CIS ADJUSTING MODE
In this mode, the position of Scanner motor is moved from the home
position up to the specified value. And document reading lamp is
turned on.
Press the [STOP] key to exit the mode.
2.13. SHARP CHART AGING
SHARP CHART is printed continuously.
Press the [STOP] key for interruption.
2.14. ASF AGING
The recording paper is fed continuously.
Press the [STOP] key for interruption.
2.15. IJP LIST MODE
Maintenance data of the printer is output.
2.16. LIFE MODE
MACHINE PAGE COUNT is displayed.
Press the [STOP] key to exit the mode.
•
LIFE MODE can also be checked by the following operation.
2.17. LIFE CLEAR MODE
MACHINE DOT COUNT and MACHINE PAGE COUNT are cleared.
2.18. SECURE PASS LIST
Print the SECURE PASS LIST.
MACHINE DOT COUNT Machine total dot count
MACHINE PAGE COUNT Machine total page count
CARTRIDGE DOT COUNT Cartridge-by-cartridge dot count
IDLE MAINTENANCE COUNT Maintenance information
INSTALL MAINTENANCE
COUNT Maintenance information
BEGIN OF JOB MAINTENANCE
COUNT Maintenance information
THRESHOLD MAINTENANCE
COUNT Maintenance information
POJ MAINTENANCE COUNT Maintenance information
SWATH START TEMPERA-
TURE Temperature control information
FUSE MEMORY VALUE Cartridge information
VPH ON TIME Cartridge information
CARTRIDGE CHANGE COUNT Cartridge replacement count
JAM COUNT Jam count
NOZZLE CLEAN COUNT Nozzle cleaning count
CALIBRATION ENVIRONMENT
TEMPERATURE Environmental temperature infor-
mation
CALIBRATION PRINT HEAD
TEMPERATURE Cartridge temperature informa-
tion
TEMPERATURE MODE Temperature control information
DIAG MODE
12:CIS ADJUST
[START/MEMORY] key
[START/MEMORY] key
The motor will move to the specified position and the reading lamp is lit on.
CIS ADJUST MODE
Start by pressing the
[START/MEMORY] key
DIAG MODE
13:SHARP CHART AGING
SHARP CHART AGING
PRINTING P.1
Start by pressing the
[START/MEMORY] key
DIAG MODE
14:ASF AGING
ASF AGING
Start by pressing the
[START/MEMORY] key
PRINTING
DIAG MODE
15:IJP LIST MODE
Start by pressing the
[START/MEMORY] key
MACH.COUNT=0123456789
DIAG MODE
16:LIFE MODE
STAND-BY state
Press
FUNKTION
Start by pressing the
[START/MEMORY] key
DIAG MODE
17:LIFE CLEAR MODE
Start by pressing the
[START/MEMORY] key
DIAG MODE
18:SECURE PASS LIST