Sharp TL-M4600 Operation Manual Download Page 11

Page: 11 / 55

Intr
oduction

Accessories

Supplied accessories

If any component should be missing, please contact your dealer.



Liquid Crystal Display:



Power cord (Approx. 6 feet [.8 m]):



R-6 battery (“AA” size, UM/SUM-3, HP-7 or similar):



CD-ROM:



Operation manual:

<TINS-D530WJZZ>



Remote control:



Setup stand:



Cable clamp:



Power cord clamp:

* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

• Codes in “< >” are Replacement parts codes.

Note

Optional accessories

The listed optional accessories are available for the LCD Monitor.
Please contact the nearest Sharp Authorized Dealer.



Speaker unit

: AN-5SP, AN-46SP



Wall-mount bracket

: AN-5AG4



USB remote receiver : AN-MR

• Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp

Authorized Dealer or Service Center.

• Additional optional accessories may be available in the near future. When purchasing, please read the newest catalog for

compatibility and check the availability.

Note

Summary of Contents for TL-M4600
























































Search results

Summary of Contents for TL-M4600

Reviews:

Brands by name

Popular brands

Sharp TL-M4600, Operation Manual

Search results

Summary of Contents for TL-M4600

Reviews:

Brands by name

Popular brands