background image

1

SX68JS10

WARNING

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power
receptacle, when servicing this chassis. To prevent electric shock, do not remove cover. No user –  serviceable
parts inside. Refer servicing to qualified service personnel.

SERVICE MANUAL

COLOUR TELEVISION

Chassis No. SP-91

S79L8SX68JS10

In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.

MODEL

SERVICE MANUAL

COLOUR TELEVISION

MODEL SX68JS10

Page

FEATURES .................................................................................................................................................... 2
ELECTRICAL SPECIFICATIONS .................................................................................................................. 2
IMPOTANT SERVICE NOTES ....................................................................................................................... 3
ADJUSTMENT PRECAUTION ....................................................................................................................... 4
SERVICE ADJUSTMENT .............................................................................................................................. 8
TROUBLE SHOOTING TABLE .................................................................................................................... 17
SOLID STATE DEVICE BASE DIAGRAM ................................................................................................... 22
WAVEFORMS .............................................................................................................................................. 23
CHASSIS LAYOUT ...................................................................................................................................... 24
BLOCK DIAGRAM ....................................................................................................................................... 26
DESCRIPTION OF SCHEMATIC DIAGRAM ............................................................................................... 30
SCHEMATIC DIAGRAM .............................................................................................................................. 31
PRINTED WIRING BOARD ASSEMBLIES .................................................................................................. 42
REPLACEMENT PARTS LIST ..................................................................................................................... 51

CONTENTS

SX68JS10

SHARP CORPORATION

SX68JS10

Summary of Contents for SX68JS10































































Reviews: