Sharp SoftBank 812SH, Instruction Manual

Page: 263 / 402

13-6
13
Optional Ser
vices
Select Status
A
Press
b
^
Call Waiting status appears.
C
Press
b
to return.
Enter a phone number during a call
A
Press
f
^
Line 2 is open. Line 1 is placed on hold.
^
Press
D
to select a number from Phone Book or press
f
for
1+ seconds to select from Call Log.
During a call, press
f
.
^
The line switches. The other line is placed on hold.
Press
N x
while switching between two lines
A
Select Multi Party
A
Press
b A
Select
Conference All
A
Press
b
C
To switch to private conference during Conference Call,
select a number/name
A
Press
b A
Select Private
A
Press
b
B
The other lines are placed on hold.
C
To switch back to Conference Call during private conference
or after opening a new line, press
N x
A
Select Multi
Party
A
Press
b A
Select Conference All
A
Press
b
Tip
H ^
Handset does not ring or vibrate for incoming calls
while a line is engaged. A tone sounds from Earpiece.
^
When Voicemail or Call Forwarding is active,
unanswered calls are transferred to Voicemail Centre or
the forwarding number. When active service is set to
Always Call Waiting is disabled.
Status Check Call Waiting status
Main Menu
H
Settings
A
Call/Video Call (
F
)
A
Call Waiting
Conference Call
An additional contract is required.
Dial New
Number
Open another line during a call
Swap Calls Switch between two open lines
Closing Handset while Someone is on Hold
C
All lines are disconnected.
Pressing
g
while Someone is on Hold
C
Active line ends and handset re-engages the party on hold.
Line 1 Ends while Line 2 is on Hold
C
Short beeps sound. To re-engage the party on hold:
Press
N x
A
Select Retrieve
A
Press
b
Conference
Call
Use up to five lines simultaneously
Ending Calls during Conference Call
C
All lines are disconnected.
Some Lines End during Conference Call
C
Other lines remain connected.