Sharp SoftBank 203SH, User Manual

Page: 17 / 134

15
Getting Started
SoftBank 203SH
Charging Handset
Battery is built into handset.
AC Charger, Desktop Holder (optional accessory), Micro USB
Cable (optional accessory), Micro USB Charging Adapter
(optional accessory) and In-Car Charger (optional accessory)
are not water or dust proof. Do not charge handset while it is
wet.
AC Charger
Use AC Charger (SHCEJ1).
Open External Device Port Cover (hereafter "Port Cover")
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Plug AC Charger into AC outlet after rotating blades out as
shown
Notification Lamp illuminates while charging, and goes out
when charge is full.
Unplug AC Charger and retract blades
Remove Micro USB plug from External Device Port
Close Port Cover
・Close Port Cover firmly. Debris trapped between gasket and
base may expose handset to liquid/dust.