E-19
SD-AT1000W_LAG_E3.fm
04/7/9
SD-AT1000W
ENGLISH
TINSZA121AWZZ
B
asic Ope
ration
- Lis
te
n
ing
t
o
the
r
a
dio -
Listening to the radio
"
Manual or Auto tuning
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "STEREO" indicator.
!
"
" will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"STEREO" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band.
3
Press the TUNING ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired
station.
Auto tuning:
When the TUNING button is pressed for 0.5 seconds or more, scanning will start
automatically and the tuner will stop at the first receivable broadcast station.
!
When radio interference occurs, auto scan tuning may stop automatically at
that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING button again.
FM stereo receiving indicator
FM stereo mode indicator
FM stereo
FM monaural
AM
