Sharp PN-L603WA Page 18 Operation Manual Download

Page: 18 / 70

Caution

• Turn on the monitor first before turning on the computer or

playback device.

• To keep the performance of the wireless controller stable, put

the monitor in the Power off (Standby mode) state once a day.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on

1. Press the POWER button.

POWER button / Power LED

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in input signal waiting mode and you press

the POWER button, the monitor enters standby mode.

• Setting the SCHEDULE flashes the power LED alternately

in red and orange in standby mode.

• To disable the logo screen from displaying when turning the

power ON, set LOGO SCREEN to OFF on the OTHERS

menu. (See page 37.)

• You can fix the input mode that appears after startup. Set

START INPUT MODE on the SETUP menu.

Summary of Contents for PN-L603WA







































































Search results

Summary of Contents for PN-L603WA

Reviews:

Related manuals for PN-L603WA

Brands by name

Popular brands

Sharp PN-L603WA, Operation Manual

Search results

Summary of Contents for PN-L603WA

Reviews:

Related manuals for PN-L603WA

Brands by name

Popular brands