Sharp Plasmacluster FP-J60M Operation Manual Download Page 3

Page: 3 / 16

The air purifier draws in room air through

the air intake, circulates it through a Pre-

Filter, a Deodorizing Filter and a HEPA

Filter inside the main unit, and then

discharges it through the air outlet. The

HEPA Filter can remove 99.97% of dust

particles as small as 0.3 microns that pass

through the filter and also helps absorb

odors.The Deodorizing Filter gradually

absorbs odors as they pass through the

filter.

Some odors absorbed by the filters will break down over time, causing additional odors.

Depending on usage conditions, and especially if the main unit is used in environments

significantly more severe than a normal household, these odors may become noticeable sooner

than expected. If these odors persist, replace the filters. (page 13)

NOTE

•

The air purifier is designed to remove air-suspended dust and the odors.

The air purifier is not designed to remove harmful gases such as carbon monoxide contained in cigarette smoke.

The air purifier may not completely remove an odor if the source of the odor is still present.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ........4

PART NAMES ..........................................6

PREPARATION ........................................8

OPERATION

START/STOP

........................................9

AUTO MODE

........................................9

HAZE MODE

.........................................9

PLASMACLUSTER ION SPOT MODE

.......9

SELECTING MODE

..............................9

ON TIMER

.............................................10

OFF TIMER

...........................................10

SELECTING DISPLAY

..........................10

PLASMACLUSTER ION ON/OFF

.........10

CHILD LOCK

.........................................10

HOW TO CHANGE VARIOUS SETTING

.........

Light Control / Auto Restart / Adjusting Senser

Sensitivity (Light / Dust(sensitive) / Odor)

CARE AND MAINTENANCE

MAIN UNIT / BACK PANEL

..................12

HEPA FILTER / DEODORIZING FILTER

......12

PLASMACLUSTER ION GENERATING UNIT

..12

REPLACEMENT

HEPA FILTER / DEODORIZING FILTER

......13

PLASMACLUSTER ION GENERATING UNIT

..13

TROUBLESHOOTING .............................14

SPECIFICATIONS ....................................15

Thank you for purchasing this SHARP Air Purifier.

Please read this manual carefully before using the product.

This manual should be kept in a safe place for handy reference.

Please read before operating your new Air Purifier

Pre-Filter

Deodorizing Filter

HEPA Filter

FP-J80M_J60M.indd 3

2018/09/07 10:23:42

Summary of Contents for Plasmacluster FP-J60M

















Search results

Summary of Contents for Plasmacluster FP-J60M

Reviews:

Related manuals for Plasmacluster FP-J60M

Brands by name

Popular brands

Sharp Plasmacluster FP-J60M, Operation Manual

Search results

Summary of Contents for Plasmacluster FP-J60M

Reviews:

Related manuals for Plasmacluster FP-J60M

Brands by name

Popular brands