Sharp PG-F317X - Notevision XGA DLP Projector Page 60 Operation Manual Download

Page: 60 / 70

Removing and Installing
the Lamp Unit

• Do not touch the glass surface of the lamp

unit or the inside of the projector.

• To avoid injury to yourself and damage to the

lamp, make sure you carefully follow the steps
below.

• Do not loosen other screws except for the

lamp unit cover and lamp unit.

Press

STANDBY/ON

on the projec-

tor or

STANDBY

on the remote

control to put the projector into
standby mode.

• Wait until the cooling fan stops.

Warning!

• Do not remove the lamp unit from the projec-

tor right after use. The lamp and parts around
the lamp will be very hot and may cause burns
or injury.

Disconnect the power cord.

• Unplug the power cord from the AC

socket.

• Leave the lamp until it has fully cooled

down (about 1 hour).

Remove the lamp unit cover.

• Turn the projector over. Loosen the user

service screw (

) that secures the lamp

unit cover. Remove the lamp unit cover
(

Lamp unit
AN-F212LP

Info

Optional

accessory

AC socket

User service screw
(for lamp unit cover)

STANDBY/ON button

Regarding the Lamp (Continued)

Summary of Contents for PG-F317X - Notevision XGA DLP Projector







































































Search results

Summary of Contents for PG-F317X - Notevision XGA DLP Projector

Reviews:

Related manuals for PG-F317X - Notevision XGA DLP Projector

Brands by name

Popular brands

Sharp PG-F317X - Notevision XGA DLP Projector, Operation Manual

Search results

Summary of Contents for PG-F317X - Notevision XGA DLP Projector

Reviews:

Related manuals for PG-F317X - Notevision XGA DLP Projector

Brands by name

Popular brands