Easy to Use Functions
-59
Displaying the Break Timer
"
On-screen Display
Displaying and Setting
the Break Timer
1
Press
. The break timer
starts to count down from 5
minutes.
2
When “
” is displayed, press
'
'
'
'
'
,
"
"
"
"
"
,
\
\
\
\
\
or
|
|
|
|
|
to set the break
timer.
•
You can set anywhere between 1 and
60 minutes (in 1 minute units).
•
The break timer starts to count down
as soon as
'
,
"
,
\
or
|
is pressed.
3
Press
to cancel the break
timer.
Note
•
Auto Power Off will be temporarily dis-
abled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will auto-
matically shut off if the break timer has
elapsed.
•
The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page
BREAK TIMER
button
This function can be used to show the remaining time for break during meeting.
'
,
"
,
\
,
|
buttons
Summary of Contents for PG-C45X - Notevision XGA LCD Projector
