8-5
8
Security menu
•
See the previous chapter about setting passwords.
•
In some password settings, you cannot select some items.
Supervisor Password Is
Shows the status of the supervisor password.
Set
means the
supervisor password has already been set.
Clear
means it has not been set yet.
User Password Is
Shows the status of the user password.
Set
means the user
password has already been set.
Clear
means it has not been set yet.
Set Supervisor Password
Defines the supervisor password (up to eight characters).
Set User Password
Defines the user password (up to eight characters). You cannot
set the user password unless you have set the supervisor password.
If you lose your password, you will be unable to access the computer or
change the configuration. Make sure to select a password you will never
forget, or write it down and protect it in a secure place. Otherwise, you
will have to contact your dealer for assistance.
Password on boot
Defines whether the system requires passwords during the boot
process.
Enabled
means that you need to input a password to continue.
Diskette access
Specifies who can access the floppy disk drive.
Supervisor
means
you need to input the supervisor password to read/write a floppy disk.
User
means
you can input either the supervisor or the user password.
Boot Sector Virus Protection
Defines whether the boot sector of the hard disk is
write-protected. When formatting the hard disk or when reinstalling software, set it
to
Disabled
.
