Sharp ND-U230C1 Installation And User Manual Download Page 7

Ver. 2.0U Dec. 4, 2008 

 

 

- 7 -                                                                    Installation Manual for PV modules 

USER MANUAL 

 
 

IMPORTANT SAFETY INSTRUCTIONS 

This manual contains important safety instructions for the PV module that must be followed during the maintenance of PV 
modules. 

1)To reduce the risk of electric shock, do not perform any servicing unless you are qualified to do so. 
2)The installation must be performed by a certified installer/servicer to ensure system integrity and safety. 
3)Do not pull the PV cables. 
4)Do not touch any surface of module. 
5)Do not place/drop objects onto the PV modules. 
6)Do not disassemble or attempt to repair the PV module by yourself. 
7)Do not drop the PV module. 
8)Do not damage, pull, bend, or place heavy material on cables. 
9)Upon completion of any service or repairs, ask the installer/servicer to perform routine checks to determine that the PV 

modules are in safe and proper operating condition. 

10)When replacement parts are required, be sure the installer/servicer uses parts specified by the manufacturer with same 

characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazard. 

11)Consult your local building and safety department for required permits and applicable regulations. 

 
 
 
 
 
 

SHARP ELECTRONICS CORPORATION 

PHOTOVOLTAIC MODULE LIMITED WARRANTY

 

 
This Limited Warranty applies to photovoltaic modules manufactured by SHARP with the following model numbers: 

ND-U230C1 / ND-U224C1 / ND-U216C1 / ND- 224UC1 / ND-220UC1 / ND-216UC1 / ND-208UC1 / ND-200UC1 / 
NT-175UC1 / NT-170UC1 / NE-170UC1 / NE-165UC1

 

 
Limited Warranty For Materials or Workmanship: Sharp Electronics Corporation warrants to the first consumer purchaser 
that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective 
workmanship and materials, and Sharp agrees that for a period of one (1) year from the date of purchase by the consumer, 
that Sharp will, at its option, either repair the defect or replace the defective Product or part thereof with a new or 
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.   
 
Limited Warranty For Power: The warranty period with respect to power output continues for a total of 25 years from date 
of purchase by the consumer, the first 10 years at 90% minimum rated power output and the balance of 15 years at 80% 
minimum rated power output.    This warranty is transferable when product remains installed in original location at the time 
of product warranty registration.   
 
This warranty does not apply to any alteration of the appearance of the Product that does not affect the performance or 
functionality of the Product, nor to the additional excluded item(s) set forth below nor to any Product, in Sharp’s sole 
discretion, the exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or 
handling, or which has been altered or modified in design or construction.   
 
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide 
proof of purchase to the servicer.   
 
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. 
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE 
LIMITED TO THE PERIOD(S) FROM THE DATE OF THE PURCHASE SET FORTH BELOW. Some states do not allow 
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.   
 
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those 
described herein, or to extend the duration of any warranties beyond the time period described above on behalf of Sharp.   
 

Summary of Contents for ND-U230C1









Reviews: