Sharp MX-M6570, User Manual

Page: 756 / 935

6-17
DOCUMENT FILING ► SAVING FILES WITH DOCUMENT FILING
DEFAULT SETTING FOR SCAN SAVE
In "Settings (administrator)", select [System Settings] → [Document Filing Settings] → [Condition Settings] → [Image
Orientation], [Default Color Mode Settings], [Default Exposure Settings], [Default Original Image Type], [Initial
Resolution Setting], [Scan Complete Sound Setting], [Default Output Tray], [Erase Width Adjustment] [Card Shot
Settings].
Image Orientation
Changes the image orientation.
Default Color Mode Settings
Selects the default settings for black & white and color when Scan to HDD is used.
Disable Change of B/W Setting in Auto Mode
This setting disables selection of B/W settings from the base screen when the color mode is set to Auto.
Default Exposure Settings
Default exposure settings for document filing can be configured.
Select [Auto] or [Manual].
If you select [Manual], set the exposure to one of 5 levels.
Default Original Image Type
Select the original type beforehand to enable scanning at a resolution suitable for the original.
Initial Resolution Setting
Resolutions can be selected for the default resolution for transmission.
Scan Complete Sound Setting
Adjusts the volume of the beep that sounds when scanning ends. The beep can also be turned off.
Default Output Tray
Selects the default output tray for printing a file stored by Scan to HDD.
The items that appear will vary depending the machine configuration.
Erase Width Adjustment
This is used to set the default erase width for erase function.
Specify a value from 0" (0 mm) to 1" (20 mm) in increments of 1/8" (1 mm) for both edge erase and center erase.
Card Shot Settings
This is used to set the default original size for the card shot function.
Specify a value from 1" (20 mm) to 8-1/2" (210 mm) in increments of 1/8" (1 mm) for both the X (horizontal) and Y
(vertical) dimensions of the original.
Fit to Store Size
Always displays the [Fit to Store Size] key on the card shot screen.