manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 93 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 93

1-52

BEFORE USING THE MACHINE

Contents

* For index paper, equivalent to 140-lbs.

* For index paper, equivalent to 140-lbs.

Specifications are subject to change for improvement without notice.

Supplies

The finisher and saddle stitch finisher require the following staple cartridge:

Staple cartridge for finisher and 
saddle stitch finisher (approx. 5,000 
per cartridge X 3 cartridges)
SF-SC11

Staple cartridge for saddle stitch 
finisher (approx. 2000 per cartridge X 
3 cartridges)
AR-SC3

STAPLE CARTRIDGE REPLACEMENT AND STAPLE 
JAM REMOVAL

When a finisher is installed, a message will appear when the staple cartridge runs out of staples or a staple jam occurs.
Follow the procedure below to replace the staple cartridge or remove jammed staples.

Dimensions

When tray is folded up: 27-9/16" (W) x 24-13/16" (D) x 45-9/32" (H)
(700 mm (W) x 630 mm (D) x1150 mm(H))
When tray is extended: 32" (W) x 24-13/16" (D) x 45-9/32" (H)
(813 mm (W) x 630 mm (D) x1150 mm(H))
Not including stopper (1-37/64" (40 mm)) when attached to machine

Weight

Approx. 119 lbs. (Approx. 54 k

g

)

Approx. 165 lbs. (Approx. 75 k

g

)

Overall dimensions when 
attached to machine

75-15/16" (W) x 24-13/16" (D) (Separation from machine 15-3/4")
(1904 mm (W) x 630 mm (D) (Separation from machine 400 mm))

Name

Punch module (AR-PN4B)

Hole punching

3 holes

Allowed paper sizes for 
punching

11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, B5, B5R

Page weight

15 to 68* lbs. (56 to 256 

g/

m

2

)

Power supply

Supplied from finisher / saddle stitch finisher

Dimensions

3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H) (95 mm (W) x 560 mm (D) x 170 mm (H))

Weight

Approx. 7.8 lbs. (Approx. 3.5 k

g

)

• The following papers cannot be stapled and punched:

Special papers such as transparency film and label sheets

• If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments