Sharp MX-M623 Operation Manual Download Page 836

Page: 836 / 877

8-17

SADDLE STITCH UNIT

Open the lower cover of the saddle
stitch finisher.

When an optional inserter is installed, open the front cover of
the inserter before opening the lower cover of the finisher.

Slide out the saddle stitch unit carefully
toward the front.

Remove the empty staple case.

While pushing down on lever (A), pull up
knob (B).

Remove any jammed staples, and then
return knob (B) to its original position.

Be sure to remove any strips of staples.

Do not touch the stapling area.
The stapler could injure you.

(A)

(B)

Jammed staples

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M623, Operation Manual, Page: 836 / 877

Search results

Summary of Contents for MX-M623

Reviews: