manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 614 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 614

5-96

SCANNER/INTERNET FAX

Contents

ELIMINATING BLANK PAGES FROM A 
TRANSMISSION (Blank Page Skip)

When blank pages are included in originals scanned, the blank pages can be detected and automatically eliminated 
from transmission.

• This function cannot be used in Internet fax mode.

• Depending on the original, some pages that are not blank may be detected as blank pages and thus not sent, and some 

pages that are blank may not be detected as blank and thus sent.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face 
down on the document glass.

2

Specify the destination.

☞

ENTERING DESTINATIONS

 (page 5-18)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

3

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the 

 keys to switch through the screens.

(4) Touch the [Blank Page Skip] key.

☞

SPECIAL MODES

 (page 5-71)

Blank pages

Send

Blank pages are not sent

1

1

1

Original size 
detector

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments