manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 47 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 47

1-6

BEFORE USING THE MACHINE

Contents

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT 
GLASS

(1)

Document feeding area cover

Open this cover to remove an original misfeed or clean 
the paper feed roller.

(2)

Original guides

These help ensure that the original is scanned correctly. 
Adjust the guides to the width of the original.

☞

PLACING THE ORIGINAL

 (page 1-44)

(3)

Document feeder tray

Place originals in this tray. 1-sided originals must be 
placed face up.

☞

PLACING THE ORIGINAL

 (page 1-44)

(4)

Original exit tray

Originals are delivered to this tray after scanning.

(5)

Scanning area

Originals placed in the document feeder tray are scanned 
here.

☞

REGULAR MAINTENANCE

 (page 1-69)

(6)

Original size detector

This detects the size of an original placed on the 
document glass.

☞

PLACING THE ORIGINAL ON THE DOCUMENT 
GLASS

 (page 1-46)

(7)

Document glass

Use this to scan a book or other thick original that cannot 
be fed through the automatic document feeder.

☞

PLACING THE ORIGINAL ON THE DOCUMENT 
GLASS

 (page 1-46)

(7)

(5)

(6)

(1)

(2)

(3)

(4)

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments