manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 172 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 172

2-12

COPIER

Contents

This section explains the basic procedures for making copies, including selection of the copy ratio and other copy 
settings.

MAKING COPIES

USING THE AUTOMATIC DOCUMENT FEEDER TO 
MAKE COPIES

This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.

BASIC PROCEDURE FOR MAKING 
COPIES

1

Place the originals face up in the 
document feeder tray with the edges 
aligned evenly.

Insert the originals all the way into the document feeder tray. 
Multiple originals can be placed in the document feeder tray. 
The stack of originals must not be higher than the indicator line 
on the tray.

2

Check the paper to be used.

Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.

☞

PAPER TRAYS

 (page 2-11)

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not 
selected automatically. In this event, change the paper size manually.

1

Indicator 
line

Auto

8½x11

Plain

8½x11

Special Modes

2-Sided Copy

Output

File

Quick File

Copy Ratio

100%

Original

Paper Select

Auto

Exposure

Auto

Preview

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments