Sharp MX-M623 Operation Manual Download Page 116

Page: 116 / 877

1-75

REPLACING THE STAMP CARTRIDGE

If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the
stamp cartridge (AR-SV1).

Supplies

Stamp cartridge (2 in package) AR-SV1

Open the automatic document feeder.

Remove the document backplate sheet
from the automatic document feeder.

Remove the sheet slowly. Place the removed sheet with the
side that was attached face up on the document glass.

Grasp the tab on the stamp unit and pull
the unit out.

Remove the stamp cartridge (A).

Tab

(A)

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M623, Operation Manual, Page: 116 / 877

Search results

Summary of Contents for MX-M623

Reviews: