manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 106 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 106

1-65

BEFORE USING THE MACHINE

Contents

Using the inserter

For paper sizes that can be stapled or punched, see the finisher and saddle stitch finisher specifications on page 1-51.
Some paper types cannot be stapled or punched (see "

NOTES

" on page 1-54). Do not use these paper types.

1

Load paper in the inserter.

Load the paper face up. When performing pamphlet stapling, 
place the paper so that the opened pages are face up as 
shown.
Adjust the paper guide to the size of the paper.

2

Press the desired mode key.

Press key (2) on page 1-63 for stapling or pamphlet stapling. Press key (1) on page 1-63 for punching. The selected mode 
lights up.

Pamphlet stapling can only be used when the saddle stitch finisher (MX-FN16) is installed.
When using pamphlet stapling, stapling and punching cannot be used in combination.

3

Press the [START] key.

Make sure that the [START] key light is illuminated green and 
then press the [START] key.

Paper guide

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments