manualshive.com logo in svg

Sharp MX-M503N, Operation Manual, Page: 68 / 806

Share
Download
Sharp MX-M503N Operation Manual Download Page 68

1-27

BEFORE USING THE MACHINE

Contents

IMPORTANT POINTS ABOUT PAPER

This section provides information that you should know before loading paper in the paper trays.
Be sure to read this section before loading paper.

NAMES AND LOCATIONS OF TRAYS

The names of the trays are as follows.

THE MEANING OF "R" IN PAPER SIZES

Some original and paper sizes can be placed in either the vertical or the horizontal orientation. To differentiate between 
vertical and horizontal orientations, paper sizes in the horizontal orientation will be followed by an "R" (for example, A4R, 
8-1/2" x 11"R).
Sizes that can be placed only in the horizontal orientation (A3W, A3, B4, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13") 
do not include the "R" in their size indication.

LOADING PAPER

Horizontal orientation

"R" is appended.

Vertical orientation

"R" is not appended.

Can be placed only in the 

horizontal orientation

"R" is not appended.

Bypass tray

Tray 5 (when a large 
capacity tray is installed)

Tray 1

Tray 2

Tray 3 (when a stand/1 x 500 sheet 
paper drawer or a stand/2 x 500 
sheet paper drawer is installed)

Tray 4 (when a stand/2 x 500 sheet 
paper drawer is installed)

A4R

(8-½" x 11"R)

A4

(8-½" x 11")

A3

(11" x 17")

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments