Sharp MX-M503N, Operation Manual, Page: 678 / 806

7-29
SYSTEM SETTINGS
Contents
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also
shown.
User Control
* This cannot be set on the machine. Set this in "User Control" in the Web pages.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see " System Settings (General) List " (page 7-6).
• For explanations of settings related to the fax function, see " SYSTEM SETTINGS FOR FAX " (page 7-97).
Item Factory default setting Page
■
User Control
7-45
●
User Authentication Setting 7-45
X
User Authentication Disabled 7-45
X
Authentication Method Setting Authenticate a User by Login Name
and Password
7-45
X
Device Account Mode Setting Disabled 7-45
●
Other Settings 7-46
X
Actions when the Limit of Pages for Output Jobs Job is Completed even when the Limit
of Pages is Reached
7-46
X
The Number of User Name Displayed Setting 12 7-46
X
A Warning when Login Fails Disabled 7-46
X
Disabling of Printing by Invalid User Disabled 7-46
X
Automatically print stored jobs after login Disabled 7-46
X
Default Network Authentication Server Setting – 7-46
X
Perform LDAP server access control. Disabled 7-47
X
Display Usage Status after Login – 7-48
X
User Information Print – 7-48
●
User List – 7-49
●
Page Limit Group List – 7-51
●
Authority Group List – 7-52
●
Favourite Operation Group List * – 7-55
X
Favourite Operation Group Registration * – 7-55
X
My Menu List * – 7-56
●
User Count – 7-57