Sharp MX-M503N, Operation Manual, Page: 381 / 806

4-48
FACSIMILE
Contents
SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. If, for example, the
scan size were A4 (8-1/2" x 11") and the send size were B5 (5-1/2" x 8-1/2"), the image would be reduced before
transmission.
• Only standard original sizes can be automatically detected.
☞
STANDARD SIZES (page 4-29)
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (Specify using a standard size) (page 4-49)
☞
Specifying the original scan size (by numerical values) (page 4-51)
Auto Auto
Auto
USB Mem. Scan Fax Scan
Standard
Auto Reception
Fax Memory : 100 %
Internet Fax PC Scan
Scan : Send :
A4
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Preview
A4 (8-1/2" x 11")
The image is reduced
to B5 (5-1/2" x 8-1/2")
before transmission
"Scan Size"
"Send Size" is set to
B5 (5-1/2" x 8-1/2")
Transmission