Sharp MX-M503N Operation Manual Download Page 109

Page: 109 / 806

1-68

REPLACING THE STAMP CARTRIDGE

If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the
stamp cartridge (AR-SV1).

Supplies

Stamp cartridge (2 in package) AR-SV1

Open the automatic document feeder.

Open the holders on the automatic
document feeder that hold the original
pressure sheet.

Open the holders (two) on the left and right sides.

Grasp the tab on the stamp unit and pull
the unit out.

Remove the stamp cartridge (A).

Tab

(A)

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M503N, Operation Manual, Page: 109 / 806

Search results

Summary of Contents for MX-M503N

Reviews: