Sharp MX-M350-N, Operation Manual, Page: 29 / 228

PART NAMES AND FUNCTIONS
1-15
1
■
Job status screen (common to print, scan, fax and Internet fax)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
This screen can be used to display the "JOB QUEUE" (showing stored jobs and the current job) or the
"COMPLETE" job list (showing finished jobs). This screen can be used to check jobs, interrupt a job in progress
to perform another job, and cancel a job.
(1) Job list
The displayed jobs in the job list are themselves
operation keys. To cancel printing or to give a job
the highest print priority, touch the relevant job key
to select the job and execute the desired operation
using the keys described in (8) and (9).
This shows the current job and the jobs waiting to
be run. The icons to the left of the jobs in the
queue show the job mode. The document filing
reprint job icon is highlighted.
Note that the icon does not become highlighted during
retransmission of a fax/image transmission job.
*1 "PAPER EMPTY" in the job status display
When a job status display indicates "PAPER
EMPTY", the specified paper size for the job is not
loaded in any of the trays.
In this case, the job will be suspended until the
required paper is loaded. Other stored jobs will be
printed (if possible) until the required paper is loaded.
(Other jobs will not be printed if the paper runs out
during printing.) If you need to change the paper size
because the specified paper size is not available,
touch the current job key to select it and then touch
the [DETAIL] key described in (10).
(2) Mode select key
This switches the job list display between "JOB
QUEUE" and "COMPLETE".
"JOB QUEUE": Shows stored jobs and the job in
progress.
"COMPLETE": Shows finished jobs.
Files saved using the "FILE"*
2
and "QUICK
FILE"*
2
functions and finished broadcast
transmission jobs appear as keys in the finished
job screen. The "FILE"*
2
or "QUICK FILE"*
2
job
keys in the finished job screen can be touched,
followed by the [CALL] key*
2
, to call up a finished
job and print or transmit it. A finished broadcast
transmission job key can be touched followed by
the [DETAIL] key to check the result of the
transmission.
*2 Can only be used on the MX-M350N/MX-M450N
or when the document filing function has been
added.
JOB QUEUE
COPY
COPY
Suzuki
066211221
STATUS
020 / 001
020 / 000
020 / 000
002 / 000
PRINT JOB
SCAN TO FAX JOB
INTERNET-FAX INTERNET-FAX
JOB QUEUE
COMPLETE
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
DETAIL
CALL
PAPER EMPTY
WAITING
WAITING
1/1
SETS / PROGRESS
COPYING
"JOB QUEUE" screen
"COMPLETE"
job screen *1 (1) (2)
(3) (4) (5) (6) (7) (8) (9)(10) (11)
Print mode Copy mode
Scan to e-mail job Scan to FTP job
Scan to Desktop job
Scan to Network folder job
Fax send job Fax reception job
PC-Fax send job
i-Fax send job i-Fax reception job
PC-Internet Fax send job
Internet Fax mode
SCAN mode
Fax mode
Copy_SEC.book 15 ページ ２００６年１２月１３日 水曜日 午後３時１分