Sharp MX-M266N, Operation Manual

Page: 750 / 794

8-3
TROUBLESHOOTING
Contents
Makin g a copy of a non-standard size ori g inal
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centering" special mode of copy mode can be selected to position the copied
image in the center of the paper.
FREQUENTLY ASKED QUESTIONS
(1-17)
inch
8
X
Y 6
Original
Size Input
OK
OK Cancel
(1-11 5/8)
inch
From the base screen of copy mode,
touch [Original] then [Size Input].
If the X dimension
(width) of the
document is less than
5-1/2" (140 mm) or
the Y dimension
(height) is less than
5-1/8" (131 mm),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
1 Place the ori g inals. 2 Enter the ori g inal size.
Paper Select
Cancel
Plain
Pre - Punched
H eavy Paper
Pre - Printed
Color
Recycled
Thin Paper
Transparency
Letter H ead
Labels
Tab Paper
H eavy Paper : 28 lbs.bond , - 110 lbs.index (106 - 200 g/m 2 )
Bypass Tray Type/Si z e Setting
Select the paper type.
1
2
Envelope
Paper Select
Paper Tray Bypass Tray
OK
Recycled
Plain
Plain
2. 8 ½ x11R
8 ½ x11
3. 8 ½ x14
4. 11x17
1.
Plain
8 ½ x11
Plain
3 Place paper in the bypass tray. 4 Select the bypass tray.
From the base screen of copy mode, touch [Paper
Select] and then "Bypass tray paper type".
Type : Recycled
Size : 8-1/2" x 11"
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.