Sharp MX-M266N, Operation Manual

Page: 726 / 794

7-96
SYSTEM SETTINGS
Contents
Copy Function Settin g s
Disablin g Deletion of Job Pro g rams
This is used to prohibit the deletion and changing of copy
settings stored in job programs.
Disablin g of Bypass-Tray in Duplex Copy
This is used to prohibit the use of the bypass tray when
making two-sided copies.
The bypass tray is often used to feed label sheets,
transparency film, and other special media for which
two-sided copying is prohibited. If a sheet of one of these
special media enters the reversing unit, a misfeed or
damage to the unit may result. If special media for which
two-sided copying is prohibited is often used, it is
recommended that you enable this setting.
Disablin g of Auto Paper Selection
This setting is used to disable the Auto Paper Selection
function.
When this setting is enabled, automatic selection of
paper that is the same size as the original on the
document glass or in the automatic document feeder
does not take place.
Printer Settin g s
Prohibit Notice Pa g e Printin g
This setting is used to disable printing of notice pages.
Prohibit Test Pa g e Printin g
This setting is used to disable printing of test pages.
When this setting is enabled, "Printer Test Page" in the
system settings cannot be used to print test pages.
Exclude Bypass-Tray from Auto Paper Select
When [Auto] is selected for paper type selection, the
bypass tray can be excluded from the trays that can be
selected. This is recommended when special paper is
often placed in the bypass tray.
Disablin g of USB Memory Direct Print
This function requires the hard disk drive is installed.
This setting is used to disable printing of files on USB
memory.
When this setting is enabled, "USB Memory" in the
External Data Access screen cannot be used to print files.
Ima g e Send Settin g s
Other Disablin g
Disable Switchin g of Display Order
This is used to prohibit changes to the order of display
(search number order, ascending, descending) in the
address book.
When this setting is enabled, touching a tab on the
address book screen does not change the order. The
currently selected display order will be the order that is
used after the setting is selected.
Disable Scan Function
This is used to disable PC scan and USB memory scan.
When these modes are disabled, they are grayed out
when the mode is changed in the base screen.
Settin g s to Disable Re g istration
Disable Re g isterin g Destination from Operation Panel
This disables address control from the machine.
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
• Individual
Select All: Select all items.
Clear Checked: Clear all selections.
Disable Re g isterin g Destination on Web Pa g e
(When network connection is enabled.)
This disables address control from the Web pages.
• Group (Direct Entry)
• Group (Address Book)
• Individual
Select All: Select all items.
Clear Checked: Clear all selections.
Disable Re g istration of Pro g ram
This prohibits the use of the address book when a
program is stored.
Configure the setting for each of the following items:
• E-mail
• FTP
• Desktop
• Network Folder
• Internet Fax (Including Direct SMTP)
• Fax
Select All: Select all items.
Clear Checked: Clear all selections.
Disable Re g istration of Memory Box
Disable all types of memory box registration.
Configure the setting for each of the following items:
Polling Memory, Confidential, Relay Broadcast (Direct
Entry), Relay Broadcast (Address Book)
Select All: Select all items.
Clear Checked: Clear all selections.