Sharp MX-M266N Operation Manual Download Page 133

Page: 133 / 794

2-32

COPIER

Contents

OUTPUT MODES

This section explains the output modes.

Sort mode

This is used to sort (collate) output into sets.

Example: Sortin

the output into 5 sets

Group mode

This function groups copies by page.

Example: Groups of 5 copies of each pa

Offset function

This function offsets each set of copies from the previous set in the output tray, making it easy to separate sets of copies.

• The sort function is automatically selected when

originals are placed in the automatic document feeder.

• When the Quick File Folder for document filing is

full, copying of a large number of originals using the
sort function will be impeded. Delete unneeded files
from the Quick File Folder.

Sort

Output

Originals

Output

Set the number of copies (5).

Touch the [Output] key.

Touch the [Sort] key.

Press the [START] key.

The group function is automatically selected when an
original is placed on the document glass.

Group

Output

Originals

Output

Set the number of copies (5).

Touch the [Output] key.

Touch the [Group] key.

Press the [START] key.

• The offset function cannot be used in the right tray.

• The offset function cannot be selected when the staple sort function is selected.

Offset function "ON"

Offset function "OFF"

Summary of Contents for MX-M266N



























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands

Sharp MX-M266N, Operation Manual

Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands