Sharp MX-M266N, Operation Manual

Page: 115 / 794

2-14
COPIER
Contents
MAKING A COPY USING THE DOCUMENT GLASS
To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the
automatic document feeder and place the original on the document glass. This section explains how to make a copy
(1-sided copy of a 1-sided original) using the document glass.
1
Open the automatic document feeder,
place the ori
g inal face down on the
document g lass, and then g ently close
the automatic document feeder.
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
2
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.
+
PAPER TRAYS (page 2-11)
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
1
8-1/2" x 11"R (A4R)
B5R
8-1/2" x 14" (B4)
11" x 17" (A3) 8-1/2" x 11" (A4)
5-1/2" x 8-1/2"
(A5)
B5
mark
Document g lass scale
Document g lass scale
mark
Auto
8 ½ x11
Plain
8 ½ x11
Color Mode Special Modes
2 - Sided Copy
Output
File
Quick File
Copy Ratio
100 %
Original Paper Select
Auto
Full Color
Exposure
Auto
Preview
Plain
3.
1.
2.
4.
8 ½ x11
11x17
8 ½ x11R
8 ½ x14
8 ½ x11
3.
2.
4. 11x17
8 ½ x11R
8 ½ x14
1.
8 ½ x11
Plain
8
½ x11