background image

INSTALLATION MANUAL

Parts marked with “

“ are important for maintaining the safety of the set. 

Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

MX-M232D
MX-M202D

MX-M182D
MX-M182

(With optional SPF/RSPF installed)

(With optional SPF/RSPF installed)

DIGITAL MULTIFUNCTIONAL 
SYSTEM

    MX-M182
    MX-M182D
    MX-M202D
    MX-M232D

CODE : 00ZMXM182/I2E

MODEL

[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

[ 2 ] CONFIGURATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

[ 3 ] MX-M232D/MX-M202D/MX-M182D/MX-M182 . . . . . . . . . . . . . . 3-1

[ 4 ] AR-SP10/AR-RP10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

[ 5 ] AR-D36/AR-D37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

[ 6 ] MX-FX13/MX-XB17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

[ 7 ] MX-NB12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

[ 8 ] MX-TR10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

[ 9 ] MX-EB14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

[10] MX-PK10 PS3 EXPANSION KIT . . . . . . . . . . . . . . . . . . . . . . . . 10-1

[11] CHANGING THE COPY PAPER SIZE IN THE TRAY. . . . . . . .  11-1

[12] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

CONTENTS

Summary of Contents for MX-M182D









































Reviews: