27
3
Document Control Setting
Document control
The document control function is used to embed a document control pattern
on the paper when a copy, print job, received fax, or list print is printed.
If a person attempts to scan a document with an embedded document
control pattern on a SHARP machine that has the document control function
enabled, the message "Document control pattern is detected. This job is
canceled." will appear and an e-mail will be sent to the administrator.
This prevents secondary copying and faxing of sensitive documents.
Document control may not be effective when certain original sizes or
types, certain paper sizes or types, or certain settings are used.
To enable effective operation of the document control function, observe
the following points.
l
Original
l
The function may not operate correctly if the original consists of large
proportion of photographs.
l
The document control function is intended to protect text data, and
thus it may not operate correctly if used to protect graphic data.
l
Paper on which the document control pattern is printed
l
White paper is recommended. If paper other than white paper is
used, the document control pattern may not be detected and the
function may not operate correctly.
l
Use B5 or larger size paper.
The following paper sizes can be used:
A3W (12" x 18"), A3, B4, A4, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 7-1/4" x 10-1/2"R, 8K, 16K
(When the paper size is A4 or smaller, the paper can be used in both
the horizontal and vertical orientations.)
Disclaimer
Sharp does not guarantee that the document control function will always
operate effectively. There may be some instances in which the document control
function does not operate effectively.
Summary of Contents for MX-FR51U
Page 39: ...EX1 ...
