Sharp MX-C607P, User Manual

Page: 79 / 190

Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance periodically, or to replace
parts and supplies, may cause damage to your printer.
Adjusting the speaker volume
Adjusting the default internal speaker volume
1
From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback
2
Adjust the volume.
Notes:
•
If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.
•
The volume resets to the default value after the session is logged out or when the printer wakes from
Sleep or Hibernate mode.
Networking
Connecting the printer to a Wi
‑
Fi network
Make sure that Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network
Overview > Active Adapter .
1
From the home screen, touch Settings > Network/Ports > Wireless > Setup On Printer Panel > Choose
Network .
2
Select a Wi
‑
Fi network, and then type the network password.
Note: For Wi
‑
Fi
‑
network
‑
ready printer models, a prompt for Wi
‑
Fi network setup appears during initial
setup.
Connecting the printer to a wireless network using Wi
‑
Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS
‑
certified or WPS
‑
compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
•
Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview
> Active Adapter .
Maintaining the printer 79