Sharp MX-C607P User Manual Download

Page: 157 / 190

Action

Yes

Step 1

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded in
the tray.

•

You can also change the setting on the printer control
panel. From the home screen, touch

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Do vertical white lines appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Check if you are using the recommended paper type.

Load the speciﬁed paper source with the recommended paper
type.

Print the document.

Do vertical white lines still appear on prints?

Contact your

dealer

. The problem is

solved.

Color quality problems

Adjusting toner darkness

From the home screen, touch

Settings

Print

Quality

Adjust the toner darkness.

Apply the changes.

Modifying the colors in printed output

From the home screen, touch

Settings

Print

Quality

Advanced Imaging

Color Correction

In the Color Correction menu, touch

Manual

Color Correction Content

Choose the appropriate color conversion setting.

Troubleshooting

157

Summary of Contents for MX-C607P































































































































































































Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands

Sharp MX-C607P, User Manual

Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands