Sharp MX-C607P User Manual Download

Page: 152 / 190

Mottled print and dots

Note:

Before solving the problem, print the Print Quality Test Pages. From the home screen, touch

Settings

Troubleshooting

Print Quality Test Pages

Action

Yes

Step 1

Check the printer for leaked toner contamination.

Is the printer free of leaked toner?

Go to step 2.

Contact your

dealer

Step 2

Depending on your operating system, specify the paper type
and size from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded.

•

You can also change the settings on the printer control
panel. From the home screen, touch

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the print mottled?

Go to step 3.

The problem is
solved.

Step 3

Replace the textured or rough paper loaded in the tray with
plain paper.

Print the document.

Is the print mottled?

Contact your

dealer

. The problem is

solved.

Print crooked or skewed

Troubleshooting

152

Summary of Contents for MX-C607P































































































































































































Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands

Sharp MX-C607P, User Manual

Search results

Summary of Contents for MX-C607P

Reviews:

Related manuals for MX-C607P

Brands by name

Popular brands