Sharp MX-C507P User Manual Download Page 113

Page: 113 / 182

•

Flex, fan, and align the paper edges before loading.

•

Do not use paper that has been cut or trimmed by hand.

•

Do not mix paper sizes, weights, or types in the same tray.

•

Make sure that the paper size and type are set correctly on the computer or printer control panel.

•

Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:

•

When Jam Assist is set to On, the printer ﬂushes blank pages or pages with partial prints after a jammed
page has been cleared. Check your printed output for blank pages.

•

When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Clearing jams

113

Summary of Contents for MX-C507P























































































































































































Search results

Summary of Contents for MX-C507P

Reviews:

Related manuals for MX-C507P

Brands by name

Popular brands

Sharp MX-C507P, User Manual

Search results

Summary of Contents for MX-C507P

Reviews:

Related manuals for MX-C507P

Brands by name

Popular brands