manualshive.com logo in svg

Sharp MX-C407F, User Manual, Page: 48 / 200

Share
Download
Sharp MX-C407F User Manual Download Page 48

Connecting the printer to a wall jack in Germany

The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering 

machines. The F port is for telephones. Connect the printer to any of the N ports.

1

Connect one end of the telephone cable to the line port of the printer.

2

Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to an N port.

3

If you want to connect a telephone and answering machine to the same wall jack, then connect the devices 

as shown.

Connecting to a distinctive ring service

A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone 

number is assigned a different ring pattern.

1

From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls > 

Answer On.

2

Select a ring pattern.

 

Faxing

48

Summary of Contents for MX-C407F









































































































































































































Reviews:

No comments