Sharp MX-C407F User Manual Download Page 181

Page: 181 / 200

GENUINE SUPPLIES

For best copying results, be sure to use only Sharp Genuine Supplies which are designed,

engineered, and tested to maximize the life and performance of Sharp products. Look for the

Genuine Supplies label on the toner package.

Hot surface notice

此符號表示該表面或元件會發熱。

請當心：為避免被發熱表面或元件燙傷的危險，請先讓該表面或元件冷卻之後再觸摸。

Hinweis zum GS-Zeichen

Modell

1A9, 5A9

Gerätetyp 7528

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO

9296.

Note: Some modes may not apply to your product.

1-meter average sound pressure, dBA

Printing

One-sided: 52 (7528-1A9); 53

(7528-5A9)

Two-sided: 53 (7528-1A9); 55

(7528-5A9)

Scanning

54 (7528-1A9); 53 (7528-5A9)

Copying

Ready

15 (7528-1A9); 16 (7528-5A9)

Notices

181

Summary of Contents for MX-C407F









































































































































































































Search results

Summary of Contents for MX-C407F

Reviews:

Sharp MX-C407F, User Manual, Page: 181 / 200

Search results

Summary of Contents for MX-C407F

Reviews: