manualshive.com logo in svg

Sharp MX-C407F, User Manual, Page: 127 / 200

Share
Download
Sharp MX-C407F User Manual Download Page 127

•

Scanner glass pad

3

Close the scanner cover.

Ordering parts and supplies

To order parts and supplies, contact the place where you purchased the printer.

Note: All life estimates for printer supplies assume printing on letter

‑ 

or A4

‑

size plain paper.

Checking the status of parts and supplies

1

From the home screen, touch Status/Supplies.

2

Select the parts or supplies that you want to check.

Note: You can also access this setting by touching the top section of the home screen.

Ordering toner cartridges

Notes:

•

The estimated cartridge yield is based on the ISO/IEC 19798 standard.

•

Extremely low print coverage for extended periods of time may negatively affect actual yield and may

cause cartridge parts to fail before exhaustion of toner.

To order toner cartridges, contact the place where you purchased the printer.

Ordering a waste toner bottle

To order a waste toner bottle, contact the place where you purchased the printer.

Configuring supply notifications

1

Open a web browser, and then type the printer IP address in the address field.

 

Maintaining the printer

127

Summary of Contents for MX-C407F









































































































































































































Reviews:

No comments