manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 349 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 349

3-3

PRINTER

Contents

PRINTER FUNCTION OF THE MACHINE

The machine is equipped standard with a full color printing function. To enable printing from your computer, a printer 
driver must be installed.

See the table below to determine which printer driver to use in your environment.

Installing the printer driver in a Windows environment

To install the printer driver and configure settings in a Windows environment, see "2. SETUP IN A WINDOWS 
ENVIRONMENT" in the Software Setup Guide.

Installing the printer driver in a Macintosh environment

To install the printer driver and configure settings in a Macintosh environment, see "3. SETUP IN A MACINTOSH 
ENVIRONMENT" in the Software Setup Guide.

Environment

Printer driver type

Remarks

Windows

PCL6, PCL5c

The machine supports the Hewlett-Packard PCL6 and PCL5c printer 
control languages. It is recommended that you use the PCL6 printer 
driver. If you have a problem printing from older software using the PCL6 
printer driver, use the PCL5c printer driver.

Can be used in the 
standard machine 
configuration.

PS

This printer driver supports the PostScript 3 page description language 
developed by Adobe Systems Incorporated, and enables the machine to 
be used as a PostScript 3 compatible printer.
(A PPD file is available if it is desired to use the Windows standard PS 
printer driver.)

Macintosh

The explanations in this manual of printing in a Windows environment generally use the screens of the PCL6 printer driver. 
The printer driver screens may differ slightly depending on the printer driver that you are using.

In a Macinstosh environment, the machine can only be used as a printer if it is connected to your network.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments