Sharp MX-C311, Operation Manual, Page: 343 / 849

2-107
COPIER
Contents
CHECKING INFORMATION ON A COPY JOB WAITING
IN THE QUEUE
Detailed information can be displayed on a copy job waiting in the queue.
1
Press the [JOB STATUS] key.
2
Checking job details
(1) Touch the [Print Job] tab.
(2) Change the print job status mode to [Job
Queue].
Touch this key to change modes. The selected mode will
be highlighted.
(3) Touch the key of the job that you wish to
check.
(4) Touch the [Detail] key.
The job check screen of the job selected in (3) appears.
[Paper Select] key
If a copy job is stopped because the paper ran out, the [Paper Select] key can be pressed to change to a
different paper tray.
When the [Paper Select] key is pressed, the paper tray selection screen appears.
☞
PAPER TRAYS (page 2-9)
Touch the key of the tray that has the size of paper that you wish to use and then touch the [OK] key. The
stopped copy job will resume.
JOB STATUS
Copy 002 / 000 Waiting
Computer01 002 / 000 Waiting
0312345678 001 / 000 Waiting
Detail
Spool
Complete
Stop/Delete
Print Job
Job Queue Sets / Progress Status
Scan to Fax Job
Priority
Job Queue
Copy
Internet Fax
1
1
020 / 001 Copying
2
3
4
1
(3) (4)
(1) (2)
OK
Detail
Copy 002 / 000 Waiting
Color / B/W: Full Color
2-Sided
Copy:
Exposure: 1 5 3 Output:
Paper:
8½x11
Plain
Special
Modes:
Copy Ratio: X100% Y100%
Paper Select