manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 203 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 203

1-12

BEFORE USING THE MACHINE

Contents

SYSTEM BAR

The system bar appears at the bottom of the touch panel.
The items that appear in the system bar are explained below.

(1)

Job status display

The jobs in progress or reserved are indicated by icons. 
The icons are as follows.

* This appears in a multi-mode broadcast job.

When a base screen other than that of image send mode 
appears, the number of the tray being used to feed paper 
appears during paper feeding. The color appearing in the 
job status display depends on the job status as indicated 
in the table below.
The job status display can be touched to show the job 
status screen.

(2)

Icon display

MFP Status

020/015

Copying

020/015

Waiting

020/015

Waiting

020/015

Waiting

Auto

8½x11

Plain

Color Mode

Special Modes

2-Sided Copy

Output

File

Quick File

Original

Paper Select

Full Color

Exposure

Auto

Copy Ratio

Copying

100%

2.

3.

4.

1.

5 x8 
8 x14
8 x11

8 x11

1 

/

 2

1 

/

 2

1 

/

 2

1 

/

 2

1 

/

 2

8 x11

Plain

1 

/

 2

(1)

(2)

(3)

Print job

Copy job

Scan to E-mail 
job

Scan to FTP job

Scan to 
Network Folder 
job

Scan to 
Desktop job

Fax 
transmission 
job

Fax reception 
job

PC-Fax 
transmission 
job

Internet fax 
transmission 
job
(Including 
Direct SMTP)

Internet Fax 
reception job
(Including 
Direct SMTP)

PC-I-Fax 
transmission 
job

Broadcast job*
Inbound routing 
job

Scan to HDD 
file print job

Metadata send 
job

Job status 
display

Machine Configuration

Green

A print, scan or other job is being 
executed normally.

Yellow

The machine is warming up or on 
standby, or a job is being canceled.

Red

A paper misfeed or other error 
condition has occurred.

Gray

The machine has no jobs.

This icon appears when data is being sent or 
received.

This icon appears when fax, scan, or 
Internet fax data is stored in the machine's 
memory. When data to be transmitted is 
stored, 

 appears. When received data is 

stored, 

 appears. When both data to be 

transmitted and received data are stored, 

 appears.

This icon appears when a service technician 
has activated simulation mode.

This icon appears when a USB memory or 
other USB device is connected to the 
machine.

This icon appears when the field support 
system is being used.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments