manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 197 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 197

1-6

BEFORE USING THE MACHINE

Contents

SIDE AND BACK

(1)

USB connector (A type)

Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB 
memory to the machine.
This connector is not initially available for use. If you wish 
to use the connector, contact your service technician.

(2)

LAN connector

Connect the LAN cable to this connector when the 
machine is used on a network.
For the LAN cable, use a shielded type cable.

(3)

USB connector (B type )

Supports USB 2.0 (Hi-Speed).
A computer can be connected to this connector to use 
the machine as a printer.
For the USB cable, use a shielded cable.

(4)

Service-only connector

(5)

Power plug

(1)
(2)
(3)
(4)

(5)

Caution

This connector is for use only by service 
technicians.
Connecting a cable to this connector may 
cause the machine to malfunction.

Important note for service technicians:
The cable connected to the service connector 
must be less than 118" (3 m) in length.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments