manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 195 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 195

1-4

BEFORE USING THE MACHINE

Contents

INTERIOR

(12) Developer cartridges

This contains the developer that is necessary to transfer 
the toner to the paper.
When replacing the drum cartridge, the developer cartridge 
must be removed before the drum cartridge is replaced.

☞

Maintenance & Safety Guide

(13)

\

Drum cartridges

This contains the photosensitive drum that is used to 
create images for copying and printing.

☞

Maintenance & Safety Guide

(14) Toner cartridges

These contain toner for printing. When the toner runs out 
in a cartridge, the cartridge of the color that ran out must 
be replaced.

☞

Maintenance & Safety Guide

(15) Fusing unit

Heat is applied here to fuse the transferred image onto 
the paper.

(16) Right side cover

Open this cover to remove a misfeed.

☞

8. TROUBLESHOOTING "

REMOVING MISFEEDS

" 

(page 8-2)

(17) Paper reversing section

This is used when 2-sided printing is performed. Open 
this part to remove a paper misfeed.

☞

Maintenance & Safety Guide

(18) Main charger cover

Open this cover to clean the main charger.

☞

Maintenance & Safety Guide

(19) Toner collection container

This collects excess toner that remains after printing.

☞

Maintenance & Safety Guide

(20) Toner collection container release lever

Turn this lever when you need to release the toner 
collection container lock to replace the toner collection 
container or clean the laser unit.

☞

Maintenance & Safety Guide

(21) Paper tray right side cover

Open this to remove a paper misfeed in trays.

☞

8. TROUBLESHOOTING "

REMOVING MISFEEDS

" 

(page 8-2)

(22) Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to 
open the right side cover.

☞

8. TROUBLESHOOTING "

REMOVING MISFEEDS

" 

(page 8-2)

(14)

(13)

(15)

(17)

(16)

(20)

(19)

(18)

(21) (22)

(12)

Toner collection 
container removed and 
main charger cover open

Caution

The fusing unit is hot. Take care not to burn 
yourself when removing a paper misfeed.

Your service technician will collect the toner collection 
container.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments