Sharp MX-B557F Page 62 User Manual Download

Page: 62 / 218

Menu item

Description

Screen Brightness

20–100% (90*)

Adjust the brightness of the display.

Flash Drive Access

Enabled*
Disabled

Enable access to the flash drive.

Allow Background Removal

Off
On*

Specify whether background removal is allowed.

Allow Custom Job scans

Off
On*

Specify whether the Custom Job Scanning setting appears for

copy, scan, and fax.
Note: This menu setting appears only when a hard disk is

installed.

One Page Flatbed Scanning

Off*
On

Set the printer to scan any type of job involving the scanner

glass as a single page.
Note: The printer returns to the home screen after

performing a single flatbed scan instead of displaying

prompts.

Express Scanning

Off*
On

Set the initial scanning speed point to the fastest speed.

Output Lighting

Off
On*

Enable the integrated output light or indicator light of an

optional output bin.

Audio Feedback

Button Feedback (On*)
Volume (5*)

•

Enable audio feedback for button presses, panel

interactions, paper loaded prompts, and error notifications.

•

Adjust the feedback volume.

Screen Timeout

5–300 seconds (60*)

Set the idle time before the display shows the home screen or

before the printer logs out a user account automatically.

Note: An asterisk (*) next to a value indicates the factory default setting.

Eco-Mode

Menu item

Description

Print

Sides

‑

Sided*

‑

Sided

Specify whether to print on one side or two sides of the paper.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for MX-B557F



























































































































































































































Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands

Sharp MX-B557F, User Manual

Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands