Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail, and then enter the needed information.
Note: You can also enter the recipient using the address book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using the shortcut number
1
From the control panel, press #, and then enter the shortcut number using the keypad.
2
Send the e
‑
mail.
Creating an e-mail shortcut
1
From the home screen, touch E
‑
mail.
2
Configure the settings, and then touch
.
3
Create a shortcut.
E-mailing
46
