manualshive.com logo in svg

Sharp MX-B557F, User Manual

Share
Download
Sharp MX-B557F User Manual Download Page 175

Action

Yes

No

Step 2

a

Depending on your operating system, specify the paper type 

from the Printing Preferences or Print dialog.
Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control

panel. From the home screen, touch Settings > Paper >

Tray Configuration > Paper Size/Type.

b

Print the document.

Is the paper curled?

Go to step 3.

The problem is 

solved.

Step 3
Print on the other side of the paper.

a

Remove paper, flip it over, and then reload paper.

b

Print the document.

Is the paper curled?

Go to step 4.

The problem is 

solved.

Step 4

a

Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store 

paper in its original wrapper until you are ready to use it.

b

Print the document.

Is the paper curled?

Contact your 

dealer

. The problem is 

solved.

Print crooked or skewed

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to 

Settings > Troubleshooting > Print Quality Test Pages. For non

‑

touch

‑

screen printer models, press 

 to 

navigate through the settings.

 

Troubleshooting

175

Summary of Contents for MX-B557F



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands